Maintenance

Maintenance

Ordinary maintenance on Virto-Cuccolini vibrating sieves, nutation and multifrequency screens is simple and quick.

Among the most consumed parts, you shall consider:

  • sieving meshes;
  • seals and gaskets;
  • support springs.

To evaluate the need to replace these parts, we advise you to check the condition of the meshes with the frequency indicated in the use and maintenance manual that you have received together with your Virto-Cuccolini screen.

The sieve mesh can be replaced in two ways:

  • by purchasing the necessary mesh quantity from Virto-Cuccolini or through our dealers and replacing it following the instructions in the use and maintenance manual;
  • by purchasing the mesh ring kit, complete with assembled mesh, from Virto-Cuccolini or through our dealers, ready for use for quick replacement.

Other original spare parts, according to your needs, are available by sending us a request directly or through our dealers.

For any request for information, clarifications, spare parts lists and other needs related to ordinary maintenance, you can contact us using the form below, including the references of your Virto-Cuccolini sieve:




    I agree the terms and conditions
    I'd like to subscribe your newsletterRead more

    Why is a used Virto-Cuccolini sieve a good choice?

    As we could observe over time, Virto-Cuccolini vibrating screens have always been synonymous with quality as used screens too. Among the reasons that customers give for choosing one of our used sieves compared to those of other brands, we have for example the fact that, obviously if well maintained, a Virto-Cuccolini screen can last even [...]

    General installation tips for Virto-Cuccolini sieves

    Are you planning to include a Virto-Cuccolini sieve within your plant? Let’s go through some important tips concerning installation and use within a plant so that you can get out the best from Virto-Cuccolini sieving equipment and avoid later issues. A vibrating or tumbling sieve is a piece of equipment which – differently from any [...]

    After-Market Division inaugurated at Virto-Cuccolini

    With more than 20.000 sieves installed worldwide, Virto-Cuccolini has recently decided to reorganise their spare parts and assistance sales by creating a specific Division dedicated to After-Market support. Based on the feedback received during decades, a sieve is more frequently than not a “forgotten” unit after installation, especially when the process is continuous. “Unless the [...]

    New mesh maintenance manual for Virto-Cuccolini’s sieving equipment range

    Meshes are the heart of the sieving process. As fundamental as they are, they also happen to be quite delicate and need special care. Once a Virto-Cuccolini sieve or screen leaves our factory, meshes are out of the manufacturer's responsibility exactly as it happens with tires when you buy a new car. A tire puncture [...]

    DIY Mesh replacement on Virto-Cuccolini C-Line and T-Line sieves

    Virto-Cuccolini's sieve range was born within the ceramic industry - an environment where the continuous work of plants requires every Company to have an internal maintenance team. In order to shrink maintenance time, our Customers required to study a simple system to allow a DIY mesh replacement solution, which had great success in industries with [...]