• en
  • fr
  • de
  • it
  • ru
  • es

Non Screening

Industries
Food & Beverage Metal Powders Water Treatment Ceramics Coatings

Iron Removers for powders: The C-Line Iron Removers are designed for automatic cleaning system for powders and granulated materials. They are simple to install and operate and with high gauss strenght through their neodymium magnets. There are three lines offered:

  1. CER model is ideal for processing large quantities of materials.
  2. GLM 1/300: constructed using neodymium magnets, it is small, modular and easy to clean. Ideal for processing atomised, granulated products and dry materials.
  3. DECTRON 500-600-800-1000: made-up of electromagnetic plate with an automatic cleaning system. It is ideal for powders and raw material in specific “sizes”. The machine is designed to be installed on feeding belts of mills (raw materials) or of presses (atomised product and dry milled product).

Iron Removers for slurries: There are nine lines offered for slurries. Six of these have a surface on the grid with an operating principle that ensures full contact with the fluid which also make them easier to clean, once disconnected.

PZT 93-253: Iron-remover is a filter for fluids, proven to operate well under capacity pressure utilising permanent magnets. Its compact size, strong magnetic force from the neodymium bars and hermetic seals used make of PZT 93-253 a filter particularly suitable for being used in glazing lines, service tanks and along glaze transfer piping systems.

PZT 306 – PZP 200 – PZT 306 PLUS: is suitable for fluids and slurries and are used during glaze preparation, either as separate units or installed onto GRP trolley-mounted units with the vibrating sieves and transfer pumps.

FPT 1-2/140 – FPT 1-2/200: cone-shaped iron-removing filter for fluids, equipped with extractable magnetic core to facilitate cleaning. Suitable for controlling recovery water, engobe products, glazes with low viscosity and slurry.

DLG 120-142-205-245-300-350-400: electrical gravity iron-remover for fluids. It can be used to clean recovery water, slurry and glaze. The surface of the grids and the operating principle guarantee full contact with the fluid and make it easier to clean, once disconnected.

DLP 120-142-205-245-300-350-400: electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. Like the DLG, the surface of the grids and the operating principle guarantee full contact with the fluid and make it easier to clean, once disconnected.

DLP 205-245 PLUS: is an electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. The “Plus” version, with copper coil, guarantees double magnetic force than the standard version.

DLS 205: electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze.

DLS 205 PLUS: electrical gravity iron-removing filter for fluids. It can be used to control recovery water, slurry and glaze. The “Plus” version, with copper coil, guarantees double magnetic force than the standard version.

DEMAG 255-405-805: iron-remover for fluids with automatic cleaning system. The superior strength of permanent neodymium magnets were built in to the rollers and this feature coupled with the unique automatic cleaning system make of DEMAG iron-remover a very effective unit for controlling slurries and liquids.